Front-Loading Automatic Washer
PRODUCT MODEL NUMBERS
OVERALL DIMENSIONS
Washer dimensions
Custom undercounter installation-washer only
WFW9750W
27
"
52
1/2
"
(686 mm)
(1335 mm)
Electrical: A 120 volt, 60 Hz., AC only, 15- or 20-amp,
fused electrical supply is required. A time-delay fuse
or circuit breaker is recommended. It is recommended
that a separate circuit serving only this appliance
be provided.
39" min.
(990 mm)
381/4
"
(970 mm)
1
"
27
"
1"
(25 mm)
(25 mm)
(686 mm)
Drain System Options
Standpipe drain system - wall or floor (views A & B)
The standpipe drain requires a minimum diameter
standpipe of 2" (50 mm). The minimum carry-away
capacity can be no less than 17 gal. (64 L) per minute.
321/2
"
(820 mm)
The top of the standpipe must be at least 30" (762 mm)
high and no higher than 96" (2.4 m) from the bottom
of the washer.
For closet installation, with a door, the minimum ventilation openings in the top
and bottom of the door are required. Louvered doors with equivalent air ventilation
openings are acceptable.
6"* (152 mm)
3
"
(76 mm)
48 in.2 *
34" min.
(864 mm)
(310 cm2)
30" min.
(762 mm)
76"
(1930 mm)
24 in.2 *
3
"
(155 cm2)
(76 mm)
1
"
311/2
"
4"
(25 mm) (800 mm) (102 mm)
A
B
5½"**
(140 mm)
1"
(25 mm)
1"
(25 mm)
27"
(686 mm)
Laundry tub drain system (view C)
1"
(25 mm)
18" min
(457 mm)
The laundry tub needs a minimum 20 gal. (76 L)
capacity. The top of the laundry tub must be
at least 30" (762 mm) above the floor.
Floor drain system (view D)
The floor drain system requires a siphon break that
may be purchased separately. See “Tools and Parts.”
The siphon break must be a minimum of 28" (711 mm)
from the bottom of the washer. Additional hoses might
be needed.
27
"
1
"
1
"
31½"
4"
1
"
(686 mm)
(25 mm) (25 mm) (800 mm) (102 mm)
(25 mm)
* required spacing
For cabinet installation, with a door, the minimum ventilation openings in the top
are required.
28" min.
(mm)
(711
30" min.
(762 mm)
7
"
(178 mm)
7
"
(178 mm)
C
D
9
"
(229 mm)
1
"
311/2"
27
"
(25 mm)
4
"
1
"
(25 mm) (686 mm)
(800 mm)
(102 mm)
Ref. 461970255001
09/2009
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
|